TriNewaShield Marine Finish (Epoxy)
A high-performance, two-component amine adduct cured epoxy gloss enamel, specially formulated using selected weather- and chemical-resistant pigments. Designed for interior and exterior use, it offers a durable, abrasion-resistant barrier coat with excellent moisture resistance, ideal for marine and industrial atmospheres.
Product Information
Typical Uses:
- Exterior & interior metal and masonry surfaces
- Marine structures including decks, topsides, ballast tanks
- Industrial environments exposed to chemicals and saltwater
Surface Preparation:
- Substrate must be clean, dry, and free from contaminants.
- Conforms to ISO 8504:2000 surface preparation standards.
- Recommended abrasive blast to Sa 2½ grade.
- For repairs, clean with power or hand tools to St2/St3.
Application Details
- Method: Brush, roller, or spray
- Mixing Ratio: 4:1
- Pot Life: 6–8 hours
- Thinner: Thinner 6756
- Dry Film Thickness (DFT): 40–50 microns
- Wet Film Thickness (WFT): 73–91 microns
- Theoretical Spreading Rate: 11.00–13.75 sq. m/litre
- Touch Dry: 2–4 hours
- Handle Dry: 8 hours
- Full Cure: 7 days
- Overcoating Interval: Min 18 hours; Max 7 days
- VOC: 374 gm/litre (EPA Method 24)
- Finish: Glossy
- Color: Selected range (Red/Blue)
- Storage: Up to 12 months in sealed container under standard warehouse conditions
- Dry Heat Resistance: Up to 150°C (intermittent)
